ASME / IBR / IS 2825 certified pressure vessels for all industries — from compressed air receivers to high-pressure reactors up to 300 bar.
ASME Section VIII / IS 2825 certified horizontal pressure vessels for oil & gas, chemical, and petrochemical processing. 1-100 Bar operating pressure.
Vertical compressed air receiver tanks in carbon steel for compressor systems. IS 2825 design, 7 Bar, 10.5 Bar, and 13 Bar ratings, with safety relief valve, pressure gauge, drain valve, and inspection opening.
Steam accumulators for peak demand buffering in steam distribution systems. Carbon steel, IBR-approved, 5 Bar to 20 Bar design, with safety relief valve, pressure gauge, condensate drain, and IBR documentation.
Hydraulic pressure accumulators and hydraulic system vessels up to 350 Bar for industrial hydraulic systems, offshore, and oil & gas hydraulic power units. Bladder, piston, or diaphragm type. ASME Section VIII / PED certified.
Flash steam vessels for condensate recovery systems in steam-using industries. IBR-approved horizontal vessel for flashing high-pressure condensate to low-pressure steam for heat recovery. Carbon steel / SS 304, 2–10 Bar design.
Vertical gas-liquid separator drums for process plants, compressor stations, and chemical plants. ASME Section VIII, carbon steel or SS 304/316, with wire mesh / vane-pack mist eliminator, automatic drain, and full instrumentation.
Process knockout pots and liquid seal pots for flare systems, vent systems, and compressor liquid removal. Carbon steel or SS 316, ASME Section VIII, full vacuum to 40 Bar design with level gauge and drain.
Compressor suction scrubbers for liquid carryover protection of reciprocating and centrifugal compressors. ASME Section VIII, up to 80 Bar, with knitted wire mist eliminator, automatic drain, and level switch protection.
Coalescer vessels for liquid-liquid separation, free water removal from hydrocarbons, and ultra-fine aerosol removal from gas streams. Horizontal ASME Section VIII design with coalescing element bundle.
Industrial autoclaves for sterilization, composite curing, high-pressure chemical reactions, and hydrothermal synthesis. SS 316L or Hastelloy, ASME Section VIII up to 300 Bar, with quick-opening door, safety interlock, and heating/cooling.
Custom-fabricated pressure vessels to any specification, size, and design code. IS 2825, ASME Section VIII Div 1 & 2, IBR, PED, NACE. Any MOC: CS, SS, Duplex, Hastelloy, Inconel, Titanium, clad plate. TPI by LRIS, TUV, BV, DNV.
ASME, IBR, and IS 2825 certified pressure vessels for all industries. Products range from compressed air receivers to high-pressure autoclaves up to 300 bar. MOC options include carbon steel (SA 516 Gr 70), SS 304, SS 316, Duplex SS, and non-ferrous alloys. Third-party inspection by LRIS, BV, TUV, DNV, or IBR-certified welding inspectors available.
Products include compressed air receivers, steam accumulators, hydraulic pressure vessels, flash steam vessels, separator drums, knockout pots, suction scrubbers, coalescers, autoclaves, and custom pressure vessels for any service.
Vessel India lists ASME / IBR / IS 2825 certified pressure vessel manufacturers. Products: compressed air receivers, steam accumulators, flash steam vessels, separator drums, knockout pots, suction scrubbers, coalescers, autoclaves (up to 300 bar). MOC: SA 516 Gr 70, SS 304, SS 316, Duplex SS, non-ferrous alloys. TPI by LRIS, BV, TUV, DNV. Keywords: pressure vessel manufacturer India, ASME pressure vessel supplier, IBR certified vessel, IS 2825 pressure vessel, compressed air receiver tank India.
Get a Quote
Send us your exact specifications and our team will connect you with the right manufacturer within 24 hours.
Product: —