Autoclave Vessel (Industrial)

Pressure Vessels Vessel & Process Equipment

Autoclave

Pressure Vessels

Autoclave Vessel (Industrial)

10L–10000LSS 316L/HastelloyASME VIIIUp to 300 BarAutoclaveSterilizationChemical SynthesisHigh-Pressure

Industrial Autoclaves are high-pressure vessels with quick-opening closures, used for sterilization, composite material curing, high-pressure chemical synthesis, and hydrothermal processing.

Key Features

Quick-opening bayonet or interrupted thread closure for fast batch access
Mechanical + electrical safety interlock — door cannot open under pressure
Heating: steam jacket, internal electrical heater, or hot air recirculation
Cooling: water-cooled jacket or internal cooling coils
PLC/SCADA control for programmable temperature-pressure cycles
Data logging and batch report generation (21 CFR Part 11 optional)

Capacity / Size Range	10L – 10,000L
Material of Construction	SS 316L / SS 304 / Hastelloy
Pressure Rating	Up to 300 Bar
Certifications	ASME Section VIII, IS 2825, IBR (for steam)

📞 Call: +91 99988 04039 ✉️ info@vesselindia.com

Related Products

Air Receiver

Pressure Vessels

Vertical Compressed Air Receiver

100L–50000LCSIS 28257/10.5/13 BarVerticalSafety ValveDrain ValveIBR Optional

Vertical compressed air receiver tanks in carbon steel for compressor systems. IS 2825 design, 7 Bar, 10.5 Bar, and 13 Bar ratings, with safety relief valve, pressure gauge, drain valve, and inspection opening.

Steam Vessel

Pressure Vessels

Steam Accumulator

1000L–50000LCS/SSIBR/ASMESteam AccumulatorPressure VesselSafety ValveDrain

Steam accumulators for peak demand buffering in steam distribution systems. Carbon steel, IBR-approved, 5 Bar to 20 Bar design, with safety relief valve, pressure gauge, condensate drain, and IBR documentation.

Hydraulic

Pressure Vessels

Hydraulic Pressure Vessel / Accumulator

1L–5000LAlloy Steel/SS/CSUp to 350 BarHydraulicBladder/Piston/DiaphragmASME/PED

Hydraulic pressure accumulators and hydraulic system vessels up to 350 Bar for industrial hydraulic systems, offshore, and oil & gas hydraulic power units. Bladder, piston, or diaphragm type. ASME Section VIII / PED certified.