Custom Pressure Vessel

Pressure Vessels Vessel & Process Equipment

Custom Pressure Vessel
Custom Design
Pressure Vessels

Custom Pressure Vessel

CustomAny SizeCS/SS/Duplex/Exotic AlloyIS 2825/ASME/IBR/PEDFull Vacuum to 500 BarTPI Available

Custom Pressure Vessels are fabricated to your exact process engineering specifications — from the simplest carbon steel air receiver to the most complex multi-nozzle, exotic-alloy, high-pressure reactor vessel.

Design Codes Available

  • IS 2825 (Bureau of Indian Standards)
  • ASME Section VIII Division 1 (standard PV)
  • ASME Section VIII Division 2 (high-pressure alternative rules)
  • IBR (Indian Boiler Regulations — for steam service)
  • PED 2014/68/EU (for European export)
  • NACE MR0175 / ISO 15156 (for sour service H2S)

Third Party Inspection

Lloyd’s Register, TUV Rheinland, Bureau Veritas, DNV GL, SGS, Intertek — as per customer requirement.

Capacity / Size Range 10L – 10,00,000L
Material of Construction CS / SS 304 / SS 316 / Duplex / Hastelloy / Titanium / Clad
Pressure Rating Full Vacuum to 500 Bar
Certifications IS 2825, ASME Sec VIII Div 1 & 2, IBR, PED, NACE MR0175
WhatsApp

📞 Call: +91 99988 04039  ✉️ info@vesselindia.com

Related Products

Hydraulic Pressure Vessel / Accumulator
Hydraulic
Pressure Vessels

Hydraulic Pressure Vessel / Accumulator

1L–5000LAlloy Steel/SS/CSUp to 350 BarHydraulicBladder/Piston/DiaphragmASME/PED

Hydraulic pressure accumulators and hydraulic system vessels up to 350 Bar for industrial hydraulic systems, offshore, and oil & gas hydraulic power units. Bladder, piston, or diaphragm type. ASME Section VIII / PED certified.

Flash Steam Vessel
Flash Steam
Pressure Vessels

Flash Steam Vessel

200L–10000LCS/SSIBR/IS 2825Flash SteamCondensate RecoveryLow Pressure SteamHorizontal

Flash steam vessels for condensate recovery systems in steam-using industries. IBR-approved horizontal vessel for flashing high-pressure condensate to low-pressure steam for heat recovery. Carbon steel / SS 304, 2–10 Bar design.

Separator Drum (Vertical)
Separator
Pressure Vessels

Separator Drum (Vertical)

VerticalCS/SSASME/IS 2825Gas-Liquid SeparatorMist EliminatorVane PackDemister

Vertical gas-liquid separator drums for process plants, compressor stations, and chemical plants. ASME Section VIII, carbon steel or SS 304/316, with wire mesh / vane-pack mist eliminator, automatic drain, and full instrumentation.