Flash Steam Vessel

Pressure Vessels Vessel & Process Equipment

Flash Steam Vessel
Flash Steam
Pressure Vessels

Flash Steam Vessel

200L–10000LCS/SSIBR/IS 2825Flash SteamCondensate RecoveryLow Pressure SteamHorizontal

Flash Steam Vessels recover the energy in high-pressure condensate by allowing it to flash to lower-pressure steam, which can be used for low-grade heating or returned to the steam distribution system — improving overall steam plant efficiency.

Key Features

  • Horizontal design with tangential condensate inlet for centrifugal flash separation
  • Flash steam outlet (top) and condensate outlet (bottom) with trap
  • IBR design and stamp for flash steam at pressures above 0.5 Bar
  • Pressure reducing valve (PRV) connection; vent to atmosphere provision
  • Insulated with mineral wool and aluminium cladding
Capacity / Size Range 200L – 10,000L
Material of Construction Carbon Steel / SS 304
Pressure Rating 2 Bar to 10 Bar
Certifications IBR, IS 2825
WhatsApp

📞 Call: +91 99988 04039  ✉️ info@vesselindia.com

Related Products

Vertical Compressed Air Receiver
Air Receiver
Pressure Vessels

Vertical Compressed Air Receiver

100L–50000LCSIS 28257/10.5/13 BarVerticalSafety ValveDrain ValveIBR Optional

Vertical compressed air receiver tanks in carbon steel for compressor systems. IS 2825 design, 7 Bar, 10.5 Bar, and 13 Bar ratings, with safety relief valve, pressure gauge, drain valve, and inspection opening.

Steam Accumulator
Steam Vessel
Pressure Vessels

Steam Accumulator

1000L–50000LCS/SSIBR/ASMESteam AccumulatorPressure VesselSafety ValveDrain

Steam accumulators for peak demand buffering in steam distribution systems. Carbon steel, IBR-approved, 5 Bar to 20 Bar design, with safety relief valve, pressure gauge, condensate drain, and IBR documentation.

Hydraulic Pressure Vessel / Accumulator
Hydraulic
Pressure Vessels

Hydraulic Pressure Vessel / Accumulator

1L–5000LAlloy Steel/SS/CSUp to 350 BarHydraulicBladder/Piston/DiaphragmASME/PED

Hydraulic pressure accumulators and hydraulic system vessels up to 350 Bar for industrial hydraulic systems, offshore, and oil & gas hydraulic power units. Bladder, piston, or diaphragm type. ASME Section VIII / PED certified.