CS / SS Process Vessel (Custom)

Chemical Vessel & Process Equipment

Custom Vessel

Chemical

CS / SS Process Vessel (Custom)

CustomCS/SS/DuplexIS 2825 / ASME VIIIFull Vacuum to 150 BarAny SizeThird Party Inspection

Custom Process Vessels are fabricated to your exact process specifications — whether it is a simple CS storage drum or a complex multi-nozzle SS pressure vessel for high-temperature, high-pressure chemical service.

Fabrication Standards

IS 2825 (Indian Standard for Unfired Pressure Vessels)
ASME Section VIII Division 1 (standard pressure vessels)
ASME Section VIII Division 2 (high-pressure, alternative rules)
PED 2014/68/EU for European market

Inspection Options

Lloyd’s Register (LRIS), TUV, Bureau Veritas (BV), DNV GL, IBR
100% RT/UT of weld seams on critical vessels
PWHT (Post Weld Heat Treatment) for carbon steel

Capacity / Size Range	50L – 5,00,000L
Material of Construction	Carbon Steel (SA 516 Gr 70) / SS 304 / SS 316 / Duplex SS 2205
Pressure Rating	Full Vacuum to 150 Bar
Certifications	IS 2825, ASME Section VIII Div 1 & 2, PED 2014/68/EU

📞 Call: +91 99988 04039 ✉️ info@vesselindia.com

Related Products

Condenser

Chemical

Condenser (Process)

2–200m² AreaSS/CSTEMAHorizontal/VerticalSolvent CondenserProcess Condenser

Process condensers for solvent vapor recovery, distillation overhead condensing, and reactor off-gas condensation. Horizontal and vertical shell-and-tube design to TEMA/IS 2825 standards.

Exotic Alloy

Chemical

Process Vessel in Hastelloy / Inconel

50L–20000LHastelloy C276/C22Inconel 625Monel 400Exotic AlloyCorrosion ResistantASME

High-alloy process vessels in Hastelloy C276, Hastelloy C22, Inconel 625, and Monel 400 for severely corrosive chemical, pharmaceutical, and oil & gas applications. ASME Section VIII fabrication.

FRP Vessel

Chemical

FRP / GRP Process Vessel

500L–500000LFRP/GRPVinylester/EpoxyCorrosion ResistantLightweightBS 4994Large Capacity

FRP/GRP process and storage vessels for corrosive chemical storage and process applications where metallic vessels are uneconomical. Epoxy, vinylester, or isophthalic resin. BS 4994 / ASME RTP-1 compliant.