Suction Scrubber (Compressor)

Pressure Vessels Vessel & Process Equipment

Suction Scrubber (Compressor)
Suction Scrubber
Pressure Vessels

Suction Scrubber (Compressor)

VerticalCS/SSASMESuction ScrubberCompressor ProtectionMist EliminatorAuto DrainHigh Pressure

Compressor Suction Scrubbers are installed immediately upstream of compressor suction nozzles to protect the compressor internals from liquid slugs and droplets that could cause catastrophic mechanical damage.

Key Features

  • High-efficiency demister pad (wire mesh or vane type) — >99.8% liquid removal efficiency
  • Automatic liquid dump valve — pneumatic actuated, fail-open design
  • High-high level shutdown switch (HHLS) — trips compressor before liquid carryover
  • Design code: ASME Section VIII; NACE for sour gas service
  • Inlet, outlet, drain, instrument connections to compressor OEM specifications
Capacity / Size Range 200L – 20,000L
Material of Construction Carbon Steel / SS 304
Pressure Rating Up to 80 Bar
Certifications ASME Section VIII, NACE MR0175
WhatsApp

📞 Call: +91 99988 04039  ✉️ info@vesselindia.com

Related Products

Hydraulic Pressure Vessel / Accumulator
Hydraulic
Pressure Vessels

Hydraulic Pressure Vessel / Accumulator

1L–5000LAlloy Steel/SS/CSUp to 350 BarHydraulicBladder/Piston/DiaphragmASME/PED

Hydraulic pressure accumulators and hydraulic system vessels up to 350 Bar for industrial hydraulic systems, offshore, and oil & gas hydraulic power units. Bladder, piston, or diaphragm type. ASME Section VIII / PED certified.

Flash Steam Vessel
Flash Steam
Pressure Vessels

Flash Steam Vessel

200L–10000LCS/SSIBR/IS 2825Flash SteamCondensate RecoveryLow Pressure SteamHorizontal

Flash steam vessels for condensate recovery systems in steam-using industries. IBR-approved horizontal vessel for flashing high-pressure condensate to low-pressure steam for heat recovery. Carbon steel / SS 304, 2–10 Bar design.

Separator Drum (Vertical)
Separator
Pressure Vessels

Separator Drum (Vertical)

VerticalCS/SSASME/IS 2825Gas-Liquid SeparatorMist EliminatorVane PackDemister

Vertical gas-liquid separator drums for process plants, compressor stations, and chemical plants. ASME Section VIII, carbon steel or SS 304/316, with wire mesh / vane-pack mist eliminator, automatic drain, and full instrumentation.